"Brass offers a classic and timeless look while still feeling bold and contemporary," says Amy Biller Switzer, marketing manager at Emtek and Schaub. "We will see that continue into 2020." The finish blends nicely with most kitchen design styles, but we especially love the look of brass hardware against dark, moody cabinetry or a polished brass faucet that acts as a shiny focal point in a neutral kitchen. 
When the goal is rustic simplicity, there's no need to spend tons on custom cabinetry and granite counters. Paint transformed oak cabinets, bought off the rack at Lowe's and topped with Ikea's birch slabs, while the same white semigloss brightened stools from Walmart. An old tablecloth was used as a skirt for the farmhouse sink, and classic glass cannisters, also Walmart finds, were used for storage instead of upper cabinets.
You can remove walls and cabinetry if you have the space and the budget to do it. You can even combine this space with the dining room for one large, unified area, instead of having a bar or tall wall separate the two. If you live in a condo, check building codes to make sure you can knock out walls. Also, consult with a contractor, as they could recognize that the wall is connected to a supporting beam.
×
average cost of kitchen remodel san diego kitchen remodeling concord ca | kitchen remodel miami kitchen remodel with cost

Task Lighting: Under-cabinet lighting should be on your must-do list, since cabinets create such dark work areas. And since you’re remodeling, there won’t be a better time to hard-wire your lights. (Here’s more about under-cabinet lights.) Plan for at least two fixtures per task area to eliminate shadows. Pendant lights are good for islands and other counters without low cabinets. Recessed lights and track lights work well over sinks and general prep areas with no cabinets overhead.
Designed to fit flush and coordinate with kitchen cabinetry, integrated appliances, particularly refrigerators and dishwashers, are on the rise, according to industry experts. Today's options prevent utilitarian appliances from breaking up sightlines and seamlessly disappear into surrounding cabinetry to provide a more cohesive look and luxurious aesthetic. 
In its annual Cost vs. Value report for 2019, Remodeling Magazine puts the national average for a midrange major kitchen remodel at $66,196 and an upscale major kitchen remodel at $131,510. In the Pacific region (Alaska, California, Washington and Oregon), according to Remodeling Magazine, that same midrange major kitchen remodel jumps to $72,513 and an upscale major kitchen remodel jumps up $11,823 from the national average, to $143,333. Compare those costs to the South Atlantic Region (Maryland, South Carolina, Florida, North Carolina, Georgia, Virginia and Washington, D.C.) where a midrange major kitchen remodel prices out at $63,387 and an upscale major kitchen remodel is $126,307. The addition of luxury stone or marble countertops, high-end faucets and flooring, a commercial-grade range and luxury faucets can all significantly increase the cost of a renovation.
Before you start planning, consider the market and decide whether a low-, medium-, or high-end kitchen remodel makes the most sense. Costs can run the gamut from $2,000 for a simple paint-and-hardware upgrade to $50,000 if you’re installing expensive countertops and luxury appliances. Knowing your neighborhood will help keep from overspending – you may not get your investment back installing travertine in your tiny starter – or worse, underspending. Let’s face it, you’ll never see Formica in a high-end home, and in fact, it may become a barrier to your sale.

Plan ahead and determine whether you need to upgrade your electrical board to accommodate a new refrigerator or oven -- which can be $1,000. You may also need to move outlets and fixtures to accommodate a new layout. Plus, you may have outdated outlets that need replacement -- adding $175 to your total. Have an electrician on hand to guide you through the process and be ready to spend about 5 percent of your total on electrical work. 

When buying new fridges, ranges, and dishwashers, stick with the same brand. Fortunately appliance manufactures have begun to create good-looking, low-priced lines that include matching sets. With a little research and some smart shopping, you can find affordable appliances that look very high-end – and when they all match, you get a designer look for much less.


While home equity loans and HELOCs can come with low interest rates and fair terms, it’s important to understand that not everyone qualifies. According to the FTC, you can typically borrow only up to 85 percent of your home’s value with a first mortgage and second loan, for example. This makes home equity products a poor option for anyone who has been a homeowner for a short time and doesn’t have a lot of equity built up.

The installation of my granite countertops was a disaster. It was cut wrong and then the company and the installers tried to blame me the customer for this issue. They the installers wanted to cut my new sink to fit the counter which was cut wrong to begin with. When they (installers) left the first time they said that the company had already used my second slab for another job. Disappointing isn't the word for what we went through with this installation. Once it was all said and done 2 weeks later I found damage to my new dishwasher!!! My home was left a disaster during and after the installation and for what we paid this should never have happened. Read less
As you would expect, seamless materials, such as granite, are more durable and more costly. In comparison, you can opt for materials that add less value, such as concrete, to keep your costs down. Whether you choose wood, marble, quartz, or limestone, you can expect to pay an average rate between $2,000 and $4,500 to install the countertops of your choosing.
If you decide to go with a major remodel and spend upwards of $50,000, you should consider consulting a kitchen designer. A professional designer has the experience, connections and examples to suggest what fits with your plan. He or she can also help you save where possible, so you don't spend needlessly while still getting the final product you want.
If they’re quality wood and still in good working order, you’re in luck. This is one of the first things I check when sizing up a pre-remodel kitchen, since cabinet frames are the most expensive component of the entire space.  It’s quite simple to give salvageable cabinets a face lift. Three common ways to repurpose and save thousands include: adding new doors and drawer fronts, re-laminating fronts and sides, or repainting – which leads us to......Don’t Just Paint – Spray Paint. Have all the cabinets cleaned and lightly sanded, then have a painter come in to spray them. Don’t try to DIY this one; a couple of cans of spray paint from the hardware store just won’t do the trick. A professional spray job can make ugly cabinets look factory-new. And you can’t get the same look by painting or rolling the cabinets yourself.
Case in point: Photographer and designer Erin Kestenbaum transformed her kitchen as part of this fall’s One Room Challenge and thoughtfully included enhanced storage space. Kestenbaum’s creative solutions included vertical tray storage above the fridge, a narrow drawer for oils and spices by the range, and a coffee bar built into a full-height cabinet. "I love designing upfront ways to hide the clutter and appliances that, without a home, will inevitably end up on your countertop occupying space," she says. 
You can remove walls and cabinetry if you have the space and the budget to do it. You can even combine this space with the dining room for one large, unified area, instead of having a bar or tall wall separate the two. If you live in a condo, check building codes to make sure you can knock out walls. Also, consult with a contractor, as they could recognize that the wall is connected to a supporting beam.
×